Posted 09 August 2010 - 11:36 PM
Let the tyres scrub a little before pushing them hard.
Yes, these tyres have softer sidewall, therefore for outstation drive pump in additional 2 to 4psi, which is the norm for other tyres too......
ok, thanks... currently pump 33psi for front, 32psi for rear... will keep on monitor...
Posted 10 August 2010 - 12:42 AM
just change to PS3 205/50/r17 for RM465 each at weng tat.. thanks for vr2turbo info and accompany through out the whole afternoon... haha...
Will visit Weng Tat on my next trip back to Malaysia, hopefully WT keeps 215/50/17 PS3.
Kho51,
how about showing a photo of your wheels
NohadT5
Posted 10 August 2010 - 01:05 AM
Manual also have reading. The reading like ruler marking.........
will try to read n see the next alignment :-)
Posted 10 August 2010 - 10:36 AM
Will visit Weng Tat on my next trip back to Malaysia, hopefully WT keeps 215/50/17 PS3.
Kho51,
how about showing a photo of your wheels
Sure, will update this few days...
Posted 10 August 2010 - 07:58 PM
ok, thanks... currently pump 33psi for front, 32psi for rear... will keep on monitor...
If that pressure is for town use, then try 35psi/34psi for highway or outstation use.
Will visit Weng Tat on my next trip back to Malaysia, hopefully WT keeps 215/50/17 PS3.
Call them for price and if okay, then call them to order for you......
Posted 10 August 2010 - 08:01 PM
will try to read n see the next alignment :-)
If manual and he does not show you, you won't know how to read, unlike digital, can just read of the monitor.....
Posted 11 August 2010 - 12:02 AM
If manual and he does not show you, you won't know how to read, unlike digital, can just read of the monitor.....
i normally saw a ruler got 0 then got negative n normal numbers...but hard to read becoz the markings is very tiny only...plus cant get near...but will ask them about the readings :-)
Posted 11 August 2010 - 09:37 AM
If that pressure is for town use, then try 35psi/34psi for highway or outstation use.
Call them for price and if okay, then call them to order for you......
sir, wats the contact no pls?tq
Posted 11 August 2010 - 03:35 PM
i normally saw a ruler got 0 then got negative n normal numbers...but hard to read becoz the markings is very tiny only...plus cant get near...but will ask them about the readings :-)
Best, ask them to show you......
sir, wats the contact no pls?tq
You mean Weng Tat?
Try here, got other shops too......
http://forum.autowor...h...0&start=320
Posted 11 August 2010 - 09:35 PM
already 1200km for my PS3, em very good dry handling and cornering because travel a lot on karak highway... but a bit floating when above 130km/h, may be because of the soft sidewall...