#31
Gunnerzz
Posted 01 October 2009 - 09:39 PM
time to change la
tripple tip how?
Quad tip IS-F style
#32
SplitFire
Posted 02 October 2009 - 04:38 PM
time to change la
tripple tip how?
How about topless...sorry...tipless?
Ram me if you can!SplitFire
Posted 25 November 2009 - 12:02 PM
if low speed knocking.. lower arm bush may gone ady..
Mych
#34
ntc2000
Posted 25 November 2009 - 04:33 PM
#35
markrenesh
Posted 31 October 2014 - 09:01 PM
markrenesh
3rd Gear
-
-
Members
-
3 posts
there is some sound near the arm or stabilizer bar when go pass bumpy road
the sound is like metal bar loose... so what bush i need to change?
I've got the same issue...changed my ABSORBER LINK ROD,BRAKE CALLIPER PINS ,ENGINE MOUNT and still noise is
There..then today Mech says its the steering rack noise.....i got no free play no wobbling...and he says it cannot be serviced only changed...anyone...
Is this true the rod connects from tie rod end noisy when u bang it.
Posted 22 November 2014 - 11:26 PM
I've got the same issue...changed my ABSORBER LINK ROD,BRAKE CALLIPER PINS ,ENGINE MOUNT and still noise is
There..then today Mech says its the steering rack noise.....i got no free play no wobbling...and he says it cannot be serviced only changed...anyone...
Is this true the rod connects from tie rod end noisy when u bang it.
there are 2 flexible rods at both ends of the steering rack.... if something is loose in the rack itself,..
Other possibility is engine mounting issue.. feel any vibrations when gear is in D and brake pedal is on?
Mych
#37
vr2turbo
Posted 23 November 2014 - 12:13 PM
I've got the same issue...changed my ABSORBER LINK ROD,BRAKE CALLIPER PINS ,ENGINE MOUNT and still noise is
There..then today Mech says its the steering rack noise.....i got no free play no wobbling...and he says it cannot be serviced only changed...anyone...
Is this true the rod connects from tie rod end noisy when u bang it.
Have you checked the rack end? It connects the rack to tie rod end, has a ball like joint and when worn and gets a bit loose will have noise. If that is okay then should be the rack itself....